 |
Decide whether you will
use an Inside Mount or Outside Mount
If you want the vertical to fit within the window frame
you will be measuring for an Inside Mount or IM. If you
want the vertical to overlap the window you will measure
for an Outside Mount or OM. Always
Measure Twice!
Use the instructions given below. Measure exact, within one eighth of an inch. Factory will make all
necessary deductions on inside mounts. No deductions will
be made on outside mounts. Treat ceiling mounts the same
as inside mounts.
|
|
|
WIDTH - Measure the
opening across the top where the track is to be
installed. Give the exact measurement to 1/8 inch. Inside mounts require at least
two inches depth. HEIGHT - Measure in
three places left, center, and right. Use
the shortest dimension. Give the exact
measurement to 1/8
inch. Factory will deduct from blind to fit
inside window.
|
|
|
|
WIDTH - Blind should overlap window
opening at least three inches on each side to
insure privacy. HEIGHT - Blind
should be at least two inches above and two
inches below window opening.
If you are going from ceiling to floor you can
mount vertical blind on ceiling or wall. A
vertical blind from ceiling to floor with a wall
mount and a valance requires one inch deduction
from length for valance clip.
|
|
Stacking Off Window
One Way Draw Stacking: 1-3/4 inches per foot of
width plus 2-1/4 inches.
Split Draw Stacking: 1-3/4 inches per foot of width plus
4 inches, then divide by two for each stack. |
